Quantcast
Channel: Backup – Windows and Windows Server forum
Viewing all 3323 articles
Browse latest View live

Failed to find enough suitable disks for recreating all critical disks. 0X80042408

0
0

Our Dell Server is failing, so Dell sent us a replacement server. We want to do a bare-metal restore so that we don't have to re-install SBS. We have tried to do the restore but it fails with:  Failed to find enough suitable disks for recreating all critical disks. 0X80042408

Our old server consists of the following:

Raid 5 configuration:
Physical Drive = 930GB
Virtual disks = C: (100GB) E: (830GB)

The new Dell Server was shipped already partitioned and consists of the following:

Raid 5 Configuration:
Physical Drive = 930GB
Virtual disks = C: (300GB) E: (630GB)

Should I remove the partitions on the new dell server, so that the Bare-Metal Restore creates the partition how the old server was configured?


Brad Nelson MCSE/DCSE/A+/Network+/WCSP



Windows server 2012 R2 incremental backup to network share problem

0
0

I have set up Windows backup on a server 2012 to backup the full server to a NAS.

It is setup to make incremental backups but once in a while it start doing a full backup.

This is very annoying because it is almost 1TB data.

Why does it make a full backup sometimes and not just incremental backups and how do I fix this?

VSS issue, event ID 22, 12289, 12293, error 0x8004230f Failed to retrieve volumes that are eligible for shadow copies

0
0

I have a new Dell R710 that I have 2008 Server R2 64-bit installed. It's role is file server. I first noticed there were VSS initialization issues in BackupExec and that the system state wasn't getting backed up.
 
Then I would run "vssadmin list writers" from CMD and system writer would be timing out....
 
Writer name: 'System Writer'
    Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
    Writer Instance Id: {18370018-3454-46cf-a352-db13b2536aa6}
    State: [7] Failed
    Last error: Timed out
 
I would also get Event ID 12289 Volume Shadow Copy Service error: Unexpected error DeviceIoControl(\\?\Volume{caaccaea-2a96-11e1-b14b-806e6f6e6963} - 0000000000000140,0x0053c020,00000000003BDFD0,0,00000000003BBFA0,4096,[0]).  hr = 0x80070057, The parameter is incorrect.
 
I would also get Event ID 12293 Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details IVssSnapshotProvider::IsVolumeSupported() failed with 0x8000ffff [hr = 0x8000ffff, Catastrophic failure
 
Also event ID 22 for volsnap The shadow copy storage volume specified for shadow copies on volume\\?\Volume{caaccaea-2a96-11e1-b14b-806e6f6e6963} could not be added.
 
Also I can't configure shadow copies due to error 0x8004230f "Failed to retrieve volumes that are eligible for shadow copies.

PLEASE HELP!

Hyper V VMMS Event ID 10172 server 2012 R2

0
0

Hi,

Recently setup a brand new 2012 R2 server, using hyper v to host 3 VM's, backing up with backup exec 2014.The backups are failing, backup exec stating...

V-79-40960-38521 - Snapshot Technology: Initialization failure on: "VRTSRV::\\UKBNHV01.ProCam.local\Hyper-V?Virtual?Machine\UKBNDC01". Snapshot technology used: Microsoft Volume Shadow Copy Service (VSS).A virtual machine snapshot could not be created. Use the Event Viewer on the Hyper-V host to identify the cause. If the virtual machine is not properly configured, it may be necessary to use the Event Viewer in the virtual machine to identify the cause.

Looking at the Hyper V VMMS event viewer I get the error:

VSS writers inside virtual machine 'UKBNIT01' failed to perform BackupComplete to its shadow copy (VSS snapshot) set: Catastrophic failure (0x8000FFFF). (Virtual machine ID 7C31CD39-FFAD-4E04-BF92-223BC120BE1B) event ID 10172

I see there are other posts relating to this, with random answers suggesting fixes relating to disk speeds and all sorts. If i restart the hyper v's and physical server the backup will run maybe 2 or 3 times successfully before failing again. Clearly buying a server to restart it every 2 days isn't an option.

It seems apparent this isn't just a problem relating to server 2012 R2, but has carried across in all newer versions of windows server.

My Vss Writers list as follows:

Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.

C:\Windows\system32>vssadmin list writers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2013 Microsoft Corp.

Writer name: 'Task Scheduler Writer'
   Writer Id: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
   Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
   State: [1] Stable
   Last error: No error

Writer name: 'VSS Metadata Store Writer'
   Writer Id: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
   Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
   State: [1] Stable
   Last error: No error

Writer name: 'Performance Counters Writer'
   Writer Id: {0bada1de-01a9-4625-8278-69e735f39dd2}
   Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
   State: [1] Stable
   Last error: No error

Writer name: 'System Writer'
   Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
   Writer Instance Id: {89a328b7-87eb-48e2-a3e6-9d04b164ba32}
   State: [1] Stable
   Last error: No error

Writer name: 'Microsoft Hyper-V VSS Writer'
   Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
   Writer Instance Id: {baa1e068-a50f-4d2e-898c-a54920ae4117}
   State: [8] Failed
   Last error: Retryable error

Writer name: 'BITS Writer'
   Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
   Writer Instance Id: {4986e692-ea2c-454e-813e-9e5f71854adf}
   State: [1] Stable
   Last error: No error

Writer name: 'SqlServerWriter'
   Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
   Writer Instance Id: {f7f18f2b-660b-4e18-9aa1-5caa5115045e}
   State: [1] Stable
   Last error: No error

Writer name: 'ASR Writer'
   Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
   Writer Instance Id: {bfa584a7-72b3-47c1-90d7-87e71074e875}
   State: [1] Stable
   Last error: No error

Writer name: 'Shadow Copy Optimization Writer'
   Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
   Writer Instance Id: {954a91e4-8c93-4f21-9ceb-53f2df3fefc5}
   State: [1] Stable
   Last error: No error

Writer name: 'Registry Writer'
   Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
   Writer Instance Id: {a254fab5-d160-4a2d-9f8f-e43e7ea0708e}
   State: [1] Stable
   Last error: No error

Writer name: 'COM+ REGDB Writer'
   Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
   Writer Instance Id: {d01d076a-aa1b-4998-8a5b-91b993895405}
   State: [1] Stable
   Last error: No error

Writer name: 'WMI Writer'
   Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
   Writer Instance Id: {1e7cb515-f73d-4146-838d-74605a77628c}
   State: [1] Stable
   Last error: No error

Is anyone able to explain how to trace why the Hyper-V VSS Writer gets the retryable error?

Thanks

Nick


Windows Server Backup 2012 Copy older Backup from Dedicated HDD to NAS

0
0

Hello

I use Windows Server 2012R2 And I want to save the new year backup to NAS. The dedicated HDD stores backup from 2016.11.02 to 2017.01.06 on all day.

And I want to copy the 2016.12.31 backup to NAS

Thanx your help.

c

System Volume Information consumed 75% of drive space

0
0

Hi Team,

System Volume Information consumed 75% of drive space  even i have configured Max 5 GB of Shadow Copies. 

How i can make these free space?

Waiting for positive reply.


Thanks, Manish

Hyper-V VMs backup

0
0

Hi

I am backing up my two VMs as per screen below. Is this enough to restore  VMs when needed? Any risks to this strategy?

Can I restore a single VM if needed instead of both VMs at the same time? 

Thanks

Regards



Restore client compter from windows server2012r2

0
0

need help, trying to restore a computer from a backup file on windows server entire process took about 3 hours and there was interruption in file transfer, at the end there was a option screen referring to a folder that showed 0 for data option was to skip or cancel I chose skip and than got a message that restore was not successful due to operator canceling. can anyone help ?

Thanks VinnieDi

//backup766.rssing.com/chan-12721360/article2730-live.html

0
0

Hi,

Using Windows 2012 R2 Server. 

Trying to create a backup of everything, which comes up to <1TB. However whenever I try to do the backup I receive this error "Volumes larger than 16777216 megabytes cannot be protected." The volume is 6TB in size but there is less than 1TB of data there...

Any way to get around this issue?

Thanks

best way to backup a sbs 2011 (Active directory users) with exchange and 1tb files on it

0
0

hey, what do you propose to use to backup the above scenario.
time window would be around from 08:00 in the evening to 5:00 in the morning.

would it be good to use the internal windows Backup software and RDX Tapes - usb 3.0. Or is my time window to small? 

a full backup would be best. so would could in recovery situations (fire, theft) restore the whole System.


"Windows Backup cannot read the backup destination" when trying to backup to Backup Once to Samba share on NAS

0
0

Environment:

Windows Server 2012 R2 Essentials running in VirtualBox in a Windows 7 host. Networking is configured and works fine.

Background:

My only backup needs are to copy the contents of two folders to a NAS folder every day at 2 AM.

I configured a backup schedule in Windows Server Backup (wbadmin) to a network location which is hosted as a Samba share on a Synology NAS.

For authentication, I created a backup user which has the same username and password as a user on the Samba share, with permission to read and write the backup folder. I added this user to the Backup Operators group.

Problem:

When I try to run the Backup Once operation to test my backup, I get the following error message:

"Windows Backup cannot read the backup destination."

What I've tried:

I verified that the location is directly accessible in Windows by copying and pasting the address from the Windows Server Backup destination into explorer. Providing the backup user credentials opened the location and creating/reading files worked fine.

Adding the backup user to the Administrators group did not have an effect.

Update 2014-02-18

I checked the backup destination and was surprised to find that the scheduled backup actually completes successfully.However, Backup Once always results in the above error message. So the problem is confined to the "Backup Once" operation.


Limit from Windows Backup in SBS 2011 / 2TB drive or Partition

0
0

Hi,

i want to ask if the Windows Backup in SBS 2011 / is Limited to 2TB per Partition or drive?

so if i have a drive 3TB with 2 partitions C:\ 1,5TB and D:\ 1,5TB it would be ok to backup this? i get then 2 VHD Files wich are smaller than 2TB and all ok?

Bare Metal Restore from HPE server to Cisco UCS blade

0
0

I'm using CommVault Simpana's 1-touch bare metal restore software to restore from a backup of a physical HPE ProLiant DL580 G7 with Microsoft Server 2008 R2, to a Cisco UCS B200 M4 blade.

I've done many bare metal restores with CommVault in the past, mostly on Dell servers, and either restoring to other Dell servers or into VMware.

The HPE server has a boot LUN on an HP EVA SAN.  The Cisco UCS blade also has its LUN on the HP EVA.

During the restore I choose the correct Network and Storage drivers and it completes successfully.  When I boot up the server after restore I get one of two things:

If I try to do a Startup Repair:

Windows Boot Manager screen, Status: 0xc000000e, Info: The boot selection failed because a required device is inaccessible.

If I try to boot into Windows:

I get a BSOD, with STOP error of 0x0000007B.

I've booted into a Windows 2008 R2 ISO, and then I have to click on the Load Drivers button and select the correct driver for it to see the OS.  I choose the OS and go into my Recovery Options.

I've tried running a chkdsk.  I've tried numerous Windows repair utilities, such as bootrec/fixboot, bootrec/fixmbr, bootrec/rebuildbcd, etc, and now of it works.

I try to boot into safe mode, and it gets as far as loading \windows\system32\drivers\bfad_up.sys.

I've read some forums that talk about loading the hive from regedit, while booted into the Windows ISO, and modifying certain settings if you're going from one type of server to another, but none that mention going from HPE to Cisco UCS.

Bugcheck Code C2 - BAD_POOL_CALLER

0
0
Hi Team,

I'm having this issue on Windows 2008 R2 Ent, server was unexpected reboot with Bugcheck C2. Below are the kernel dump logs from Winbdg. 

Can anyone confirm whether below logs related to Ntfs.sys or HP Smart Array driver? 


Based on the dump bugcheck code and call stack, found that BAD_POOL_CALLER. That indicate the current thread is making a bad pool request.  Typically this is at a bad IRQL level or double freeing the same allocation.
 

Arguments:

Arg1: 000000000000000b, type of pool violation the caller is guilty of.
Arg2: fffff88008442840
Arg3: 00000000084429a8
Arg4: fffff88008443450


Checking the call stack during crash, found that server crashed when it was allocates pool memory of the specified type and returns a pointer to the allocated block.

STACK_TEXT:  
fffff880`02bc1818 fffff800`023fbca3 : 00000000`000000c2 00000000`0000000b fffff880`08442840 00000000`084429a8 : nt!KeBugCheckEx
fffff880`02bc1820 fffff880`016f9e8b : fffff880`08443380 fffff8a0`05c091a0 fffff800`4146744e fffff8a0`00000493 : nt!ExAllocatePoolWithTag+0x1a0f
fffff880`02bc18d0 fffff880`01656218 : fffffa80`7a79c0a0 fffffa80`89609240 fffff880`08443380 00000000`00000000 : Ntfs!NtfsCommonCreate+0x2534
fffff880`02bc1aa0 fffff800`022ce165 : fffff800`0246e200 fffff800`025c0200 00000000`00000000 00000000`00000000 : Ntfs!NtfsFspDispatch+0x248
fffff880`02bc1b70 fffff800`0255eee6 : 00000000`00000000 fffffa80`79550660 00000000`00000080 fffffa80`79536040 : nt!ExpWorkerThread+0x111
fffff880`02bc1c00 fffff800`022b6706 : fffff880`02472180 fffffa80`79550660 fffff880`0247d4c0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`02bc1c40 00000000`00000000 : fffff880`02bc2000 fffff880`02bbc000 fffff880`02bc18a0 00000000`00000000 : nt!KiStartSystemThread+0x16

kd> lmDvmNtfs
Browse full module list
start             end                 module name
fffff880`01653000 fffff880`017fb000   Ntfs       (pdb symbols)          C:\ProgramData\dbg\sym\ntfs.pdb\A7E1C0666D2A4377B1235D0C10225CD22\ntfs.pdb
    Loaded symbol image file: Ntfs.sys
    Image path: \SystemRoot\System32\Drivers\Ntfs.sys
    Image name: Ntfs.sys
    Browse all global symbols  functions  data
    Timestamp:        Sat Jan 09 01:50:47 2016 (568FF6F7)
    CheckSum:         0019C464
    ImageSize:        001A8000
    File version:     6.1.7601.23318
    Product version:  6.1.7601.23318

Upon checking Ntfs.sys driver updated with latest  version.



================================================================================================================================================


kd> !analyze -v
*******************************************************************************
*                                                                            *
*                        Bugcheck Analysis                                    *
*                                                                            *
*******************************************************************************

BAD_POOL_CALLER (c2)
The current thread is making a bad pool request.  Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 000000000000000b, type of pool violation the caller is guilty of.
Arg2: fffff88008442840
Arg3: 00000000084429a8
Arg4: fffff88008443450

FAULTING_IP: 
Ntfs!NtfsCommonCreate+2534
fffff880`016f9e8b e9aefbffff      jmp     Ntfs!NtfsCommonCreate+0x20e7 (fffff880`016f9a3e)

BUGCHECK_STR:  0xc2_b



STACK_TEXT:  
fffff880`02bc1818 fffff800`023fbca3 : 00000000`000000c2 00000000`0000000b fffff880`08442840 00000000`084429a8 : nt!KeBugCheckEx
fffff880`02bc1820 fffff880`016f9e8b : fffff880`08443380 fffff8a0`05c091a0 fffff800`4146744e fffff8a0`00000493 : nt!ExAllocatePoolWithTag+0x1a0f
fffff880`02bc18d0 fffff880`01656218 : fffffa80`7a79c0a0 fffffa80`89609240 fffff880`08443380 00000000`00000000 : Ntfs!NtfsCommonCreate+0x2534
fffff880`02bc1aa0 fffff800`022ce165 : fffff800`0246e200 fffff800`025c0200 00000000`00000000 00000000`00000000 : Ntfs!NtfsFspDispatch+0x248
fffff880`02bc1b70 fffff800`0255eee6 : 00000000`00000000 fffffa80`79550660 00000000`00000080 fffffa80`79536040 : nt!ExpWorkerThread+0x111
fffff880`02bc1c00 fffff800`022b6706 : fffff880`02472180 fffffa80`79550660 fffff880`0247d4c0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`02bc1c40 00000000`00000000 : fffff880`02bc2000 fffff880`02bbc000 fffff880`02bc18a0 00000000`00000000 : nt!KiStartSystemThread+0x16


FOLLOWUP_IP: 
Ntfs!NtfsCommonCreate+2534
fffff880`016f9e8b e9aefbffff      jmp     Ntfs!NtfsCommonCreate+0x20e7 (fffff880`016f9a3e)

FAULT_INSTR_CODE:  fffbaee9

SYMBOL_STACK_INDEX:  2

SYMBOL_NAME:  Ntfs!NtfsCommonCreate+2534

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: Ntfs

IMAGE_NAME:  Ntfs.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  568ff6f7

IMAGE_VERSION:  6.1.7601.23318

FAILURE_BUCKET_ID:  X64_0xc2_b_Ntfs!NtfsCommonCreate+2534

BUCKET_ID:  X64_0xc2_b_Ntfs!NtfsCommonCreate+2534

PRIMARY_PROBLEM_CLASS:  X64_0xc2_b_Ntfs!NtfsCommonCreate+2534

=========================================================================

Regards,

Raja


Windows 2008 backup failed with following error code '2147942402'.

0
0

I am using Windows 2008 SP2 on a server. Windows backup is scheduled to run every day, however it has been only successful for 1-2 times per week and failed in all the other days. Ran chkdsk on all backup target disks but found no problem.

The error message is "The system cannot find the file specified". Below are the details I copied from Event Viewer - Microsoft - Windows - Backup - Operational.

- System 

  - Provider 

   [ Name]  Microsoft-Windows-Backup 
   [ Guid]  {1db28f2e-8f80-4027-8c5a-a11f7f10f62d} 
 
   EventID 5 
 
   Version 0 
 
   Level 2 
 
   Task 0 
 
   Opcode 0 
 
   Keywords 0x4000000000000000 
 
  - TimeCreated 

   [ SystemTime]  2013-01-03T14:56:59.899Z 
 
   EventRecordID 1700 
 
   Correlation 
 
  - Execution 

   [ ProcessID]  17300 
   [ ThreadID]  11024 
 
   Channel Microsoft-Windows-Backup 
 
   Computer SERVER.virginia.local 
 
  - Security 

   [ UserID]  S-1-5-18 
 

- EventData 

  BackupTemplateID {309042DD-AD7B-4330-97AC-F94952953DDD} 
  HRESULT 2147942402 
  BackupState 12 
  BackupTarget SERVER 2012_10_02 09:25 DISK_03 
  NumOfVolumes 1 
  BackupTime 2013-01-03T09:30:04.001Z 
  HRESULT 2147942402 
  VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="12" HResult="-2147024894" DetailedHResult="0" PreviousState="9" DataTransferred="354606076416" NumUnreadableBytes="0" TotalSize="369504506368" Flags="2" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" SSBVhdSize="0"/></VolumeInfo> 
  DetailedHRESULT 0 
  SourceSnapStartTime 2013-01-03T09:30:03.997Z 
  SourceSnapEndTime 2013-01-03T09:30:34.511Z 
  PrepareBackupStartTime <TimesList><Time Time="2013-01-03T09:30:37.316Z" /></TimesList> 
  PrepareBackupEndTime <TimesList><Time Time="2013-01-03T09:30:38.629Z" /></TimesList> 
  BackupWriteStartTime <TimesList><Time Time="2013-01-03T09:30:38.631Z" /></TimesList> 
  BackupWriteEndTime <TimesList><Time Time="2013-01-03T14:56:58.920Z" /></TimesList> 
  TargetSnapStartTime 1601-01-01T00:00:00.000Z 
  TargetSnapEndTime 1601-01-01T00:00:00.000Z 
  DVDFormatStartTime <TimesList></TimesList> 
  DVDFormatEndTime <TimesList></TimesList> 
  MediaVerifyStartTime <TimesList></TimesList> 
  MediaVerifyEndTime <TimesList></TimesList> 
  BackupPreviousState 9 
  ComponentStatus <ComponentStatus></ComponentStatus> 
  SSBEnumerateStartTime 1601-01-01T00:00:00.000Z 
  SSBEnumerateEndTime 1601-01-01T00:00:00.000Z 
  SSBVhdCreationStartTime 1601-01-01T00:00:00.000Z 
  SSBVhdCreationEndTime 1601-01-01T00:00:00.000Z 
  SSBBackupStartTime 1601-01-01T00:00:00.000Z 
  SSBBackupEndTime 1601-01-01T00:00:00.000Z 
  SystemStateBackup false 

windows 10 lost admin password

0
0

i'm wanting to access video and docs on my pc and admin permission is stopping me because i can't recall password. what can I do?

 

Mapped drive used for backup not working

0
0

I have a mapped drive on a Windows server 2008. I am using a batch script using net use command to copy files and folders to this mapped drive. The scheduled task gave me an error 0x4. I found that the mapped drive gets disconnected every-time i l log off from the server. When try after mapping the drive again, it works. Any idea why this is happening?

Any suggestions would be appreciated.

What does it mean?

0
0

I'm a newbie in network computer and i'm going to learn manything.
Please someone help me to understand it. I knew something below but i cannot find out what exactly "bk a" command to do ( only search it on google without any idea about the keyword )

It's not important about the day/time command at this time athough i dont understand it. i'm going to learn it later.
Thank you if you are reading my post.

@echo off
Color 1F
Echo Number 3 - Blue
Echo Backup ServerADB after 15:30 everyday, running every hour!
xCopy "\\File-server2\ACT\Quynh\*.*" "C:\OneDrive\ACTData\Quynh\*.*" /D/E/Y
:START

set  d=%date:~0,2%
set  m=%date:~3,2%
set  hr=%time:~0,2%
set  mn=%time:~3,2%

set /a y=%date:~6,4%

    if %d% gtr 31 (
        set /a m+=1
     
    if %m% gtr 12 (
      set m=1
      set /a m+=1
    )
  if /I %m% LSS 10 set m=0%m%
  if /I %d% LSS 10 set d=0%d%
  )
If %hr% EQU 16 goto :Rar_Copy
If %hr% EQU 17 goto :Rar_Copy
If %hr% LSS 16 goto :Waiting
If %hr% GTR 18 goto :Waiting

:Rar_Copy

If exist "\\ServerA\data\A Backup Databases\%y%-%m%-%d%" goto :EXIST
If not exist "\\ServerA\data\A Backup Databases\%y%-%m%-%d%" goto :mkdir

:mkdir  
md "\\File-Server1\D$\Admin\%y%-%m%-%d%"
bk a "\\File-Server1\D$\Admin\%y%-%m%-%d%\A.rar" "\\ServerA\D$\A.Dat" /Y
bk a "\\File-Server1\D$\Admin\%y%-%m%-%d%\B.rar" "\\ServerA\D$\SwireSys.Dat" /Y
bk a "\\File-Server1\D$\Admin\%y%-%m%-%d%\C.rar" "\\ServerA\D$\B.Dat" /Y
bk a "\\File-Server1\D$\Admin\%y%-%m%-%d%\D.rar" "\\ServerA\D$\LHSys.Dat" /Y
bk a "\\File-Server1\D$\Admin\%y%-%m%-%d%\E.rar" "\\ServerA\D$\BNApp.Dat" /Y
bk a "\\File-Server1\D$\Admin\%y%-%m%-%d%\F.rar" "\\ServerA\D$\BNSys.Dat" /Y

Echo xCopy "\\File-Server1\D$\Admin\%y%-%m%-%d%\*.*" "S:\%y%-%m%-%d%\*.*" /D/E/Y
xCopy "\\File-Server1\D$\Admin\%y%-%m%-%d%\*.*" "\\ServerA\data\A Backup Databases\%y%-%m%-%d%\*.*" /D/E/Y


xCopy "\\File-Server1\D$\Admin\%y%-%m%-%d%\*.*" "C:\OneDrive\ACTData\%y%-%m%\*.*" /Y

xCopy "\\File-server2\ACT\Cuc\*.*" "C:\OneDrive\ACTData\Cuc\*.*" /D/E/Y

xCopy "\\File-server2\ACT\Huong\*.*" "C:\OneDrive\ACTData\Huong\*.*" /D/E/Y


:EXIST
Echo The folder : "\\ServerA\data\A Backup Databases\%y%-%m%-%d%" is exist !

:Waiting

set /a d+=1
if /I %d% LSS 10 set d=0%d%

if %d% gtr 31 (
        set /a m+=1      
    )

Echo The Last Running Time :%Date%,%hr%:%mn%
set /a hr=%time:~0,2%+1
Echo The Next Running Time :%Date%,%hr%:%mn%

timeout /t 3599

GOTO :START

Echo The Next Running Time :%d%/%m%/%y%,%Time%     

Backing up file server running on 2012 r2 standard evaluation and restoring on server 2012 r2 standard or datacenter

0
0

Hello all,

          My question is simple. Can I backup our branch office file server running the file server role on2012 r2 standard evaluation and restore the role along with the configurations on server2012 r2 standard  on a new box I'm about to deploy? Thanks.


Viewing all 3323 articles
Browse latest View live




Latest Images