HI,
Am using Microsoft server 2003 Service pack2 , Enterprise edition.Using HP Data tapes for backup.
When i insert 1 tape after it full prompts for second tape as usual but from few days after inserting also its not take second tape.
Its prompts continuously to insert disk .
Please help what i should do for this to avoid this prompting after inserting the second tape.
HP DAT 320 GB tapes
Afsar
Folks,
We need your help with this!
Here is the scenario:
* This VM is a DC/DNS/DHCP
* Server 2012R2 (fully patched)
* the VM is a part of DPM 2012R2 rotation (the client was pushed in from the server)
Every 3-3.5 days something happens that makes "Block level backup engine Service", Virtual Disk Service" and the Volume Shadow copy service utilization to hit the ceiling. The whole thing renders the VM unusable until reboot. All attempts
to restart or kill the service/process end up with "Access denied"
We have tried the following already:
* Removing DPM protection
* Uninstalling the DPM client
* Removing the Windows backup feature.
* Reinstalling everything in the reverse order
* Implemented DHCP access denied
registry key fix
Any assistance in resolving the situation is appreciated!
I was backing up my server when it suddenly turned off. When it restarted it showed a critical error message saying "Problem is detected with Array : 01".
Windows tried starting and kept rebooting so I just turned it off.
When I launch the RAID utility I clearly see that the drive 02:01 seems ok but the other one is marked as "failed orisconnected" (it is connected ans spinning).
This is the spec: On the server I have windows 2012R2 installed on two HD 1TB on RAID1.
I habe an unused NAS, so I decided to create an iSCSI drive as a Target, and run the windows backup utility to do a Full Backup on it.hat may I have done wrong and how could I resolve this issue?
This clearly is related to the windows backup utility since this server was working fine until then.
Thanks.
Hello,
i am doing a windows server backup with server 2012R2.
At this moment i am having this error :
Error message: There is not enough space on the disk.
How can i configure Windows Server Backup to delete the oldest backup so that this issue will not occur?
Thx
I have a new Dell R710 that I have 2008 Server R2 64-bit installed. It's role is file server. I first noticed there were VSS initialization issues in BackupExec and that the system state wasn't getting backed up.
Then I would run "vssadmin list writers" from CMD and system writer would be timing out....
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {18370018-3454-46cf-a352-db13b2536aa6}
State: [7] Failed
Last error: Timed out
I would also get Event ID 12289 Volume Shadow Copy Service error: Unexpected error DeviceIoControl(\\?\Volume{caaccaea-2a96-11e1-b14b-806e6f6e6963} - 0000000000000140,0x0053c020,00000000003BDFD0,0,00000000003BBFA0,4096,[0]).
hr = 0x80070057, The parameter is incorrect.
I would also get Event ID 12293 Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details IVssSnapshotProvider::IsVolumeSupported() failed with 0x8000ffff [hr = 0x8000ffff, Catastrophic
failure
Also event ID 22 for volsnap The shadow copy storage volume specified for shadow copies on volume\\?\Volume{caaccaea-2a96-11e1-b14b-806e6f6e6963} could not be added.
Also I can't configure shadow copies due to error 0x8004230f "Failed to retrieve volumes that are eligible for shadow copies.
PLEASE HELP!
I am attempting to do system state backup in my Test environment. I am running Hyper-V on a standalone "sandbox" server. I have configured a semi-duplicate environment.
We are updating the schema soon, and I would like to do a System State restore for practice and I haven't actually had to do one in about 10 years.
I am running 2008R2 DC as a VM in my Hyper-V environment. It has a C: and E: volume, VSS is enabled on e: and set to Unlimited. I set my set "BackupLocation=e:\adbackups" and attempt to run wbadmin.exe start systemstatebackup -backupTarget:"E:" (with quotes or without it still fails.
My error from command is Error - Volume Shadow Copy Service operation error (0x800423f4) which appears to be a generic error. In the Backup Event Viewer it shows as Event ID 9, another generic error.
I am running as Domain Admin, and I checked that I have Backup Operator rights. Volume Shadow Copy service is running.
Hello,
I'm novice to this area, after the execution of all the instructions for setting up the backup agent gives an error message: "Microsoft Azure Recovery Services Agent was unable to create a snapshot of the selected volume. Please try the operation again. If the issue persists, contact Microsoft Support(0x186C2)".
So,I experience a problem making a snapshot of selected volume.
Operating System Windows Server 2012 installed on the virtual machine in the cloud, on the server the agent is installed and the file backup is also on this server.
Thanks in advance for your help!
Vyacheslav.
Hello!
I have a problem with two VM´s on a HP Proliant ML350p Gen8, that has Windows Server 2012R2 operating system with Hyper-V role installed.
Both VM´s are also 2012R2, one is DC/DNS/FILE/PRINT and the other one is Exchange 2013.
The problem itself is that, when Windows backup (wbengine.exe - Block level backup engine service) inside VM starts, it uses almost maximum CPU resource, so the VM´s CPUs are 100% used. Backup itself is not working, there is no network trafic. Only way to get rid of 100% CPU usage is to restart the server.
When i start backup manually (Backup once - scheduled backup options), it is working and the CPU usage is around 20-30%.
One VM (DC/DNS/FILE/PRINT) has 2x vCPU and Exchange has 4x vCPU.
The problem started suddenly, the backup were performing slowly and failed.
Backups are scheduled on different time. Host level Hyper-V backup of VM´s works without any problem.
The backup location is Synology DS414 NAS and the servers are set up using iSCSI, for connecting separate backup lun´s for each server.
The Hyper-V host and both VM´s are patched up-to-date. Ofcourse i have tried a lot of restarts, looking event log, VSSADMIN - cannot find any errors...
The network setup:
Hyper-V host has a team of two physical adapters, that is set up with a external virtual switch (shared with management operating system) and used by the VM`s normal network trafic.
Hyper-V host itself is using separte physcial network card, for connecting with iSCSI to Synology NAS.
I tried to set up another physical network card on the host and create a new virtual swich, add extra virtual nic to VM`s and use this for iSCSI traffic for Windows backup and it didnt make things better.
I need to find a solution, because i cannot restart the server every night for the backups to work.
We've got a 2008 R2 server connected via iSCSI initiator to a Readynas 3200 device, and Windows Server Backup is configured to backup to that disk nightly. Weeks will go by and it will work great... all backups appear in the history when the "View Details" link is clicked in the Destination Usage section. The last time I checked, we had 27 backups available.
I have a Lenovo Yoga 2 Pro laptop that will not backup to my Windows 2008 R2 Storage Server.
These are the most recent events:
Log Name: Application
Source: .NET Runtime
Date: 10/2/2014 11:06:10 AM
Event ID: 1026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: SMOSA03
Description:
Application: SharedServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.AccessViolationException
Stack:
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.VSS.IVssWMComponent.GetFile(UInt32)
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.VSS.IVssWMComponent.GetFile(UInt32)
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.VSS.VssComponent..ctor(Microsoft.WindowsServerSolutions.DataProtection.PCBackup.VSS.IVssWMComponent)
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.VSS.VssWriter..ctor(Microsoft.WindowsServerSolutions.DataProtection.PCBackup.VSS.IVssExamineWriterMetadata)
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.VSS.ShadowVolumeSet.CreateShadowVolume(Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupUtil.VolumeInfo[])
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.VSS.ShadowVolumeSet..ctor(Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupUtil.VolumeInfo[], Microsoft.WindowsServerSolutions.DataProtection.PCBackup.Provider.IBackupReportProgress)
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupOp.BackupSetOperation.RunWithoutCatch()
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupOp.BackupSetOperation.Run()
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.Provider.BackupTask.OnBackupStart(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-10-02T16:06:10.000000000Z" />
<EventRecordID>28116</EventRecordID>
<Channel>Application</Channel>
<Computer>SMOSA03</Computer>
<Security />
</System>
<EventData>
<Data>Application: SharedServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.AccessViolationException
Stack:
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.VSS.IVssWMComponent.GetFile(UInt32)
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.VSS.IVssWMComponent.GetFile(UInt32)
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.VSS.VssComponent..ctor(Microsoft.WindowsServerSolutions.DataProtection.PCBackup.VSS.IVssWMComponent)
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.VSS.VssWriter..ctor(Microsoft.WindowsServerSolutions.DataProtection.PCBackup.VSS.IVssExamineWriterMetadata)
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.VSS.ShadowVolumeSet.CreateShadowVolume(Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupUtil.VolumeInfo[])
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.VSS.ShadowVolumeSet..ctor(Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupUtil.VolumeInfo[], Microsoft.WindowsServerSolutions.DataProtection.PCBackup.Provider.IBackupReportProgress)
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupOp.BackupSetOperation.RunWithoutCatch()
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupOp.BackupSetOperation.Run()
at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.Provider.BackupTask.OnBackupStart(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
</Data>
</EventData>
</Event>
------------------------------------------------------------------------------------------------------------------------------
Log Name: Application
Source: Application Error
Date: 10/2/2014 11:06:11 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: SMOSA03
Description:
Faulting application name: SharedServiceHost.exe, version: 6.1.1839.0, time stamp: 0x4d38a956
Faulting module name: msxml3.dll, version: 8.110.9600.17120, time stamp: 0x536da0ed
Exception code: 0xc0000005
Fault offset: 0x00000000000194ea
Faulting process id: 0x2600
Faulting application start time: 0x01cfde4c9ff44873
Faulting application path: C:\Program Files\Windows Server\Bin\SharedServiceHost.exe
Faulting module path: C:\windows\System32\msxml3.dll
Report Id: 06387ec6-4a4e-11e4-827a-8cae4cfd34be
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-10-02T16:06:11.000000000Z" />
<EventRecordID>28117</EventRecordID>
<Channel>Application</Channel>
<Computer>SMOSA03</Computer>
<Security />
</System>
<EventData>
<Data>SharedServiceHost.exe</Data>
<Data>6.1.1839.0</Data>
<Data>4d38a956</Data>
<Data>msxml3.dll</Data>
<Data>8.110.9600.17120</Data>
<Data>536da0ed</Data>
<Data>c0000005</Data>
<Data>00000000000194ea</Data>
<Data>2600</Data>
<Data>01cfde4c9ff44873</Data>
<Data>C:\Program Files\Windows Server\Bin\SharedServiceHost.exe</Data>
<Data>C:\windows\System32\msxml3.dll</Data>
<Data>06387ec6-4a4e-11e4-827a-8cae4cfd34be</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
-------------------------------------------------------------------------------------------------------------------------------
Log Name: Application
Source: Windows Error Reporting
Date: 10/2/2014 11:06:19 AM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: SMOSA03
Description:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: SharedServiceHost.exe
P2: 6.1.1839.0
P3: 4d38a956
P4: msxml3.dll
P5: 8.110.9600.17120
P6: 536da0ed
P7: c0000005
P8: 00000000000194ea
P9:
P10:
Attached files:
C:\Windows\Temp\WER975A.tmp.appcompat.txt
C:\Windows\Temp\WER9807.tmp.WERInternalMetadata.xml
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_SharedServiceHos_ab5d84ebb13ea4375c1a3ac86cd4049e7ce1d_5bed2e30_cab_24ee9805\memory.hdmp
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_SharedServiceHos_ab5d84ebb13ea4375c1a3ac86cd4049e7ce1d_5bed2e30_cab_24ee9805\triagedump.dmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_SharedServiceHos_ab5d84ebb13ea4375c1a3ac86cd4049e7ce1d_5bed2e30_cab_24ee9805
Analysis symbol:
Rechecking for solution: 0
Report Id: 06387ec6-4a4e-11e4-827a-8cae4cfd34be
Report Status: 4
Hashed bucket:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-10-02T16:06:19.000000000Z" />
<EventRecordID>28118</EventRecordID>
<Channel>Application</Channel>
<Computer>SMOSA03</Computer>
<Security />
</System>
<EventData>
<Data>
</Data>
<Data>0</Data>
<Data>APPCRASH</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>SharedServiceHost.exe</Data>
<Data>6.1.1839.0</Data>
<Data>4d38a956</Data>
<Data>msxml3.dll</Data>
<Data>8.110.9600.17120</Data>
<Data>536da0ed</Data>
<Data>c0000005</Data>
<Data>00000000000194ea</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
C:\Windows\Temp\WER975A.tmp.appcompat.txt
C:\Windows\Temp\WER9807.tmp.WERInternalMetadata.xml
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_SharedServiceHos_ab5d84ebb13ea4375c1a3ac86cd4049e7ce1d_5bed2e30_cab_24ee9805\memory.hdmp
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_SharedServiceHos_ab5d84ebb13ea4375c1a3ac86cd4049e7ce1d_5bed2e30_cab_24ee9805\triagedump.dmp</Data>
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_SharedServiceHos_ab5d84ebb13ea4375c1a3ac86cd4049e7ce1d_5bed2e30_cab_24ee9805</Data>
<Data>
</Data>
<Data>0</Data>
<Data>06387ec6-4a4e-11e4-827a-8cae4cfd34be</Data>
<Data>4</Data>
<Data>
</Data>
</EventData>
</Event>
Hello,
I am looking at changing out an older Windows 2003 Standard server and installing a new HP Proliant 310 server that will run Windows 2008 R2.
I did not setup the 2003 server and have not installed Terminal Server before. All the users RDP into the current server for everything - email (Outlook and Outlook Express), applications (Church application that handles all aspects of the congregation), files documents.
My purpose of this is inquiry is to make sure everything gets backed up properly.
The proposed new server would be setup without Terminal Services. The clients would login to the domain and gain access to shared files on the server and have all the apps installed on their computer(s).
What is the best way to backup the existing server and make sure all the user profiles data get backed up?
Doing some research on this I was thinking of connecting an external hardrive that is formatted as FAT32. Then open a Remote Desktop to the server under each client or profile, back up each clients files, PST files and so on to the external drive. Then transfer all the backup and move the files to their folder on the server and also the public folder as well. The main church application is in its own folder and I can move the entire folder to a backup drive per the software company.
Is this the best way to accomplish the backup of their data? Will it work?
Any thoughts tips, suggestions would be helpful.
Thanks,
Paul
PAUL
I have a Windows Server 2012 R2 Essentials which runs in Hyper-V on an HP Microserver (gen. 8) with host OS WS2012 R2. The guest VM is running a backup job every night to a physical pass through disk, but since about one month back in time it has begun freezing the system.
If I reboot the server the backup job runs as expected the first night, but the second night it gets stuck at "Backup in progress…" and a CPU load of almost 100%, same thing every time. :(
I can't find anything relevant in the event logs… What might be causing this trouble?
I wrote a program to copy server A’s volume 0 to server A’s volume 1.
Volume 1 is then moved from server A and placed in server B.
When server B is started I get the error: Windows failed to start. Status: 0xc000000e.
http://support.microsoft.com/kb/2261423
Running X:\Sources\Recovery\StartRep.exe will fix this problem.
This will not be an option for my disaster recovery plan as no one will be there to enter this command.
The above url indicates that I can run bcdedit to fix this problem.
On server A, once the volume copy is complete, drive letter I is assigned to the volume. I run the three bcdedit commands against drive I:
bcdedit /set {default} device partition=i:
bcdedit /set {default} osdevice partition=i:
bcdedit /set {bootmgr} device partition=i:
This does not resolve the Windows failed to start. Status: 0xc000000e error.
Please advise.I was backing up my server when it suddenly turned off. When it restarted it showed a critical error message saying "Problem is detected with Array : 01".
Windows tried starting and kept rebooting so I just turned it off.
When I launch the RAID utility I clearly see that the drive 02:01 seems ok but the other one is marked as "failed orisconnected" (it is connected ans spinning).
This is the spec: On the server I have windows 2012R2 installed on two HD 1TB on RAID1.
I habe an unused NAS, so I decided to create an iSCSI drive as a Target, and run the windows backup utility to do a Full Backup on it.hat may I have done wrong and how could I resolve this issue?
This clearly is related to the windows backup utility since this server was working fine until then.
Thanks.
Hi
I have a Windows Server 2012 that is running HyperV and two virtual machines. I set it up with Windows backup when I installed the machine about 6 months ago and it all worked fine (backing up to external hard drives on rotation).
Recently backups have not been working properly. The backup is configured to backup everything (except for the backup target) as follows:
The backup is now not working properly, with the message "Completed with warnings"
Drilling down to the logs shows that although it is backing up the C drive, it is not correctly backing up the virtual machines which means I will have a lot of trouble when I want to restore them. Here's the full log:
Backup of volume \\?\Volume{e30e3fba-40c1-11e3-93e8-806e6f6e6963}\ succeeded.
Backup of volume C: succeeded.
Application backup
*-----------------------------*
Error in backup of C:\ during enumerate: Error [0x80070003] The system cannot find the path specified.
Error in backup of C:\ during enumerate: Error [0x80070003] The system cannot find the path specified.
Error in backup of C:\ during enumerate: Error [0x80070003] The system cannot find the path specified.
Application backup
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: 128700EA-A66A-4722-9757-9473AE8E46F0
Caption : Backup Using Child Partition Snapshot\VWL-EX
Logical Path:
Error : 8078010D
Error Message : Enumeration of the files failed.
Detailed Error : 80070003
Detailed Error Message : (null)
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: CD8B7B3E-BF81-4A62-B7AB-FC0BD40AA2B1
Caption : Backup Using Child Partition Snapshot\VWL-DC
Logical Path:
Error : 8078010D
Error Message : Enumeration of the files failed.
Detailed Error : 80070003
Detailed Error Message : (null)
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: Host Component
Caption : Host Component
Logical Path:
Error : 8078010D
Error Message : Enumeration of the files failed.
Detailed Error : 80070003
Detailed Error Message : (null)
*-----------------------------*
What is causing this to happen please? I have completely re-setup the backup routine and am using a brand new external hard drive.
Hi
How to backup on active directory in step by step or any link so plz send to rajeshsawale@hotmail.com
Thanks
Rajesh
Folks,
We need your help with this!
Here is the scenario:
* This VM is a DC/DNS/DHCP
* Server 2012R2 (fully patched)
* the VM is a part of DPM 2012R2 rotation (the client was pushed in from the server)
Every 3-3.5 days something happens that makes "Block level backup engine Service", Virtual Disk Service" and the Volume Shadow copy service utilization to hit the ceiling. The whole thing renders the VM unusable until reboot. All attempts
to restart or kill the service/process end up with "Access denied"
We have tried the following already:
* Removing DPM protection
* Uninstalling the DPM client
* Removing the Windows backup feature.
* Reinstalling everything in the reverse order
* Implemented DHCP access denied
registry key fix
Any assistance in resolving the situation is appreciated!
On 2012R2 with all updates as of Oct 9 2014, run the following commands:
vssadmin.exe create shadow /for=c:
mklink.exe /d c:\snap \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy1\
reg.exe load HKLM\snap c:\snap\Windows\System32\config\SYSTEM
results in :
ERROR: An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry.
Is this expected behavior?
I have repeated this test with 2012R2 running as a VM on 3 hypervisors (ESXi, KVM, VirtualBox).
