I have a server with a 1TB SSD as the OS disk and a 1TB HDD as a data drive. I am using WBAdmin to backup the two drives to an external USB 4TB HDD. The command I am using is WBAdmin Start Backup -BackupTarget:F: -AllCritical -SystemState -Include:D: -Quiet and to restore to a new set of disks I am using the install disk and restore from an image.
My issus is that when I do a restore to a new set of disks the D: drive is restored to the SSD and the C: drive is restored to the HDD which is opposite of what I want and had from the backup. What determines which drive is restored to which? They are in an Intel 2600WT chassis and each drive is on a separate SATA controller. I put the new drives into the same slots the backed up drives were in.