Good day,
we get the following error message when we restore a Windows Server backup on a different Serverhardware:
Errors during a backup using the GUI:
The system image restore failed .
Error details: A Volume Shadow Copy Service component Encountered an unexpected error .Check the Application event log for more information.( 0x80042302 ) .
Errors during a backup through the CLI with wbadmin
The recovery operation for volume system [C: ] failed .Error : The operation ended before completion.
The recovery operation for volume system [ D:] failed .Error : The operation ended before completion.
The Automated System Recovery (ASR ) pre-recovery operation failed .
ERROR - A Volume Copy Service Shadow operational Has occurred: ( 0x80042302 )
A Volume Shadow Copy Service component encountered an unexpected error. Check the Application event log for more information.
Here are some details:
The Windows Server Backup has been performed successfully .(including System State , Bare Metal , and C : and D :)
The Windows version is: 2008 R2 SP1.
In the Restore to a modified Cisco UCS Hardware the above error message appears.It is therefore not restored to the same hardware.
During the Windows recovery the network card drivers and the HDD drivers are added.For this, the Windows DVD is unmountend and mounted the drivers DVD .Then the network is configured using netsh.
Source server :
Hardware: Cisco UCS B440 M2
HDD: Raid 1 with 278 GB
Raid Controller : LSI 9260 MegaSAS
Target server :
Hardware: Cisco UCS B200 M3
Hard disk: Raid 0 with 370 GB
Raid Controller : LSI MegaRAID SAS 2004 ROMB
We are unable to open in the DOS box the event logs to evaluate detailiere logs.
Diskpart shows the disk ( 370GB ) as Disk 1 .
The New Disk is larger than the old one.
Thanks and regards
we get the following error message when we restore a Windows Server backup on a different Serverhardware:
Errors during a backup using the GUI:
The system image restore failed .
Error details: A Volume Shadow Copy Service component Encountered an unexpected error .Check the Application event log for more information.( 0x80042302 ) .
Errors during a backup through the CLI with wbadmin
The recovery operation for volume system [C: ] failed .Error : The operation ended before completion.
The recovery operation for volume system [ D:] failed .Error : The operation ended before completion.
The Automated System Recovery (ASR ) pre-recovery operation failed .
ERROR - A Volume Copy Service Shadow operational Has occurred: ( 0x80042302 )
A Volume Shadow Copy Service component encountered an unexpected error. Check the Application event log for more information.
Here are some details:
The Windows Server Backup has been performed successfully .(including System State , Bare Metal , and C : and D :)
The Windows version is: 2008 R2 SP1.
In the Restore to a modified Cisco UCS Hardware the above error message appears.It is therefore not restored to the same hardware.
During the Windows recovery the network card drivers and the HDD drivers are added.For this, the Windows DVD is unmountend and mounted the drivers DVD .Then the network is configured using netsh.
Source server :
Hardware: Cisco UCS B440 M2
HDD: Raid 1 with 278 GB
Raid Controller : LSI 9260 MegaSAS
Target server :
Hardware: Cisco UCS B200 M3
Hard disk: Raid 0 with 370 GB
Raid Controller : LSI MegaRAID SAS 2004 ROMB
We are unable to open in the DOS box the event logs to evaluate detailiere logs.
Diskpart shows the disk ( 370GB ) as Disk 1 .
The New Disk is larger than the old one.
Thanks and regards
