Frequent failure

April 25, 2016, 10:32 am

≪ Previous: windows server 2008 R2 Backup on Multiple External USB drives

Hi Folks,

I am seeing a frequent backup failures. I backup to an SMB mounted NAS, and this works only about one third of the time. Generally I will see a log entry:

================================================================

wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.

<SNIP>

Retrieving volume information...
This will back up volume System Reserved (100.00 MB),Local Disk(C:) to\\NAS1.TCLC.org\TCLC\Backup\Justice.TCLC.org\corral.
Do you want to start the backup operation?
[Y] Yes [N] No Y

The backup operation to \\NAS1.TCLC.org\TCLC\Backup\Justice.TCLC.org\corral is starting.
Creating a shadow copy of the volumes specified for backup...
:

Creating a backup of volume System Reserved (100.00 MB), copied (46%).
The backup of volume System Reserved (100.00 MB) successfully completed.

================================================================

NOTICE: in this case, I did not get to 100%. So this is the first problem. The log continues:

================================================================

Creating a backup of volume Local Disk(C:), copied (0%).
:
Creating a backup of volume Local Disk(C:), copied (3%).

================================================================

NOTICE: It simply stops with no indication why it has stopped.

I need some suggestions how to debug this. There are no entries in the Event Log that I recognize as meaningful for this circumstance.

Thanks for the help,

Chris.

Thanks for the help,

Chris.

↧

Recovery

April 26, 2016, 10:57 pm

≫ Next: The backup operation that started at '‎2016‎-‎04‎-‎16T04:00:47.795253500Z' has failed with following error code '2155348257' (Windows Backup failed to read the file: '\WindowsImageBackup\\MediaId'.).

≪ Previous: Frequent failure

How to recover system from Backup when Server Os is corrupt and cold not start..??

↧

The backup operation that started at '‎2016‎-‎04‎-‎16T04:00:47.795253500Z' has failed with following error code '2155348257' (Windows Backup failed to read the file: '\WindowsImageBackup\\MediaId'.).

April 15, 2016, 9:27 pm

≫ Next: Server 2008 R2 Backup Failed

≪ Previous: Recovery

On a windows 2008 r2 server, i tried turn off antivirus and sql writer before i run a backup job.

It failed and give me the error

The backup operation that started at '‎2016‎-‎04‎-‎16T04:00:47.795253500Z' has failed with following error code '2155348257' (Windows Backup failed to read the file: '<backup location>\WindowsImageBackup\<Computer Name>\MediaId'.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.

I tried some searching on the net but couldn't find anything relevant to help troubleshoot this issue. Anyone can enlighten me? i tried running vssadmin list writers in command prompt and all show no errors.

Thanks in advance.

↧

Server 2008 R2 Backup Failed

April 30, 2016, 12:23 pm

≫ Next: WBAdmin

≪ Previous: The backup operation that started at '‎2016‎-‎04‎-‎16T04:00:47.795253500Z' has failed with following error code '2155348257' (Windows Backup failed to read the file: '\WindowsImageBackup\\MediaId'.).

Server 2008 R2

A fatal error occurred during a windows server backup snap-in (wbadmin.msc) operation error details: Unknown error (0x80042318) Close wbadmin.msc and then restart it

restart did not work

executed wbadmin disable backup at command prompt to erase the scheduled tasks thinking they were the problem and that has not worked,

server seems okay but I have to restore more files and can not get in, plus I need this working again any help out there?

↧

WBAdmin

April 29, 2016, 11:05 am

≫ Next: Server 2012 R2, 2 node cluster VSS is failing on one node

≪ Previous: Server 2008 R2 Backup Failed

Hi Folks,

Recently I have tried to move Windows Server 2008R2 from a Dell Dimension C521 to a Dell Optiplex 960, by the technique of a bare-metal restore of a backup of the C521 to the blank disk on the 960. This creates a disk in the 960 which is ostensibly an identical copy of the disk in the C521.

The restore was successful, but yielded a non-functioning system. Specifically, the 960 boots to where the pulsating Windows Flag logo displays, which is normally followed by narration on the screen of the steps Windows Server 2008R2 is taking to start services, but in this case, I don't get that far; I only see the mouse cursor on the screen and that is persistent for at least half an hour, after which time I aborted the experiment. This disk behaves the same way in either a Dimension C521 box or an Optiplex 960, so it doesn't seem to be related to the processor.

So, my problem is to determine why a re-imaged disk behaves the way mine does and if there is a technique to successfully boot it. What diagnostics and repair tools are available?

Thanks for the help,

Chris.

↧

Server 2012 R2, 2 node cluster VSS is failing on one node

September 11, 2015, 6:30 am

≫ Next: Windows 2008R2 System State backup problem

≪ Previous: WBAdmin

I have found fixes for Server 2008 and 2008 R2 but have yet to find a resolution
for Server 2012 R2. I have worked with EMC to try a resolve with no
luck. The issue is the e:\ volume is on the other node in the cluster but
is looking at this path due to a SAP service that installed to this
cluster volume location on this node "e:\usr\sap\trn\ascs01\exe\sapstartsrv.exe".
Below is the VSS event id, vssadmin list writers, and diskshadow output for
further information.

________________________________________

Event Id 8193, VSS -- I am receiving at every backup attempt:

Volume Shadow Copy Service error: Unexpected error calling
routine GetVolumePathName is fail on the path e:\usr\sap\trn\ascs01\exe,
winerror 0x00000002.. hr = 0x80070002, The system cannot find the file
specified.

Operation:

PrepareForSnapshot Event

Context:

Execution Context: Writer

Writer Class Id: {e8132975-6f93-4464-a53e-1050253ae220}<o:p></o:p>

Writer Name: System Writer

Writer Instance ID:
{b37cf597-c4a9-46ec-a4f1-f834daf9295c}

______________________________________________

Output for vssadmin list writers

C:\Windows\system32>vssadmin list writers

vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool

(C) Copyright 2001-2013 Microsoft Corp.

Writer name: 'Task Scheduler Writer'

   Writer Id: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}

   Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}

   State: [1] Stable

   Last error: No error

Writer name: 'VSS Metadata Store Writer'

   Writer Id: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}

   Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}

   State: [1] Stable

   Last error: No error

Writer name: 'Performance Counters Writer'

   Writer Id: {0bada1de-01a9-4625-8278-69e735f39dd2}

   Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}

   State: [1] Stable

   Last error: No error

Writer name: 'System Writer'

   Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}

   Writer Instance Id: {51014fc6-79fc-4719-a47e-890c12eae4af}

   State: [1] Stable

   Last error: No error

Writer name: 'Cluster Shared Volume VSS Writer'

   Writer Id: {1072ae1c-e5a7-4ea1-9e4a-6f7964656570}

   Writer Instance Id: {ca77048d-6a55-429d-8156-cd20cd480286}

   State: [1] Stable

   Last error: No error

Writer name: 'SqlServerWriter'

   Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}

   Writer Instance Id: {02ce344c-fee1-471e-add1-80fc0f0eab1c}

   State: [1] Stable

   Last error: No error

Writer name: 'ASR Writer'

   Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}

   Writer Instance Id: {7470832b-d895-43e1-bb24-4ba2411fa7bf}

   State: [1] Stable

   Last error: No error

Writer name: 'Registry Writer'

   Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}

   Writer Instance Id: {0591d297-755a-426e-83de-20dbc24d4a8a}

   State: [1] Stable

   Last error: No error

Writer name: 'Shadow Copy Optimization Writer'

   Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}

   Writer Instance Id: {a163cc77-d300-4089-a5fb-2a45c33deb14}

   State: [1] Stable

   Last error: No error

Writer name: 'Cluster Database'

   Writer Id: {41e12264-35d8-479b-8e5c-9b23d1dad37e}

   Writer Instance Id: {a717560f-50db-4771-99bc-03a68aa01f5d}

   State: [1] Stable

   Last error: No error

Writer name: 'COM+ REGDB Writer'

   Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}

   Writer Instance Id: {6a4a6d8b-4b54-4904-8bf9-9433120b1aad}

   State: [1] Stable

   Last error: No error

Writer name: 'WMI Writer'

   Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}

   Writer Instance Id: {2ff1dddd-8586-43f0-a824-e4025d538a3f}

   State: [1] Stable

   Last error: No error

______________________________________________

Output for diskshadow

C:\Windows\system32>diskshadow

Microsoft DiskShadow version 1.0

Copyright (C) 2013 Microsoft Corporation

On computer: AOTRNCL01, 9/11/2015 8:08:51 AM

DISKSHADOW> add volume c:

DISKSHADOW> create

COM call
"lvssObject4->GetRootAndLogicalPrefixPaths" failed.

Alias VSS_SHADOW_1 for shadow ID {a817c807-f00b-496b-b799-06a15a6f9e0f} set as
e

nvironment variable.

Alias VSS_SHADOW_SET for shadow set ID {e9ce9d2b-97d0-4415-ae49-2ec7b5b3c87d}
se

t as environment variable.

Querying all shadow copies with the shadow copy set ID
{e9ce9d2b-97d0-4415-ae49-

2ec7b5b3c87d}

        * Shadow copy
ID = {a817c807-f00b-496b-b799-06a15a6f9e0f}

%VSS_SHADOW_1%


- Shadow copy set: {e9ce9d2b-97d0-4415-ae49-2ec7b5b3c87d}

%VSS_SHADOW_SET%


- Original count of shadow copies = 1


- Original volume name: \\?\Volume{bcb4e1e6-f8a3-11e4-80bf-806e6

f6e6963}\ [C:\]


- Creation time: 9/11/2015 8:09:38 AM


- Shadow copy device name: \\?\GLOBALROOT\Device\HarddiskVolumeS

hadowCopy1


- Originating machine: AOTRNCL01.waterone.org


- Service machine: AOTRNCL01.waterone.org


- Not exposed


- Provider ID: {b5946137-7b9f-4925-af80-51abd60b20d5}


- Attributes: Auto_Release Differential

Number of shadow copies listed: 1

↧

Windows 2008R2 System State backup problem

May 11, 2016, 9:41 am

≫ Next: System State Fails

≪ Previous: Server 2012 R2, 2 node cluster VSS is failing on one node

I am having an issue trying to backup the system state on a few Windows 2008 R2 servers. When I run the wbadmin start systemstatebackup -backuptarget:\\server\share it dies right at the beginning of checking the files to back up. It states "the parameter is incorrect" and to check the error log. When I do look in the log file it is blank. When I look in the Windows application log it gives an error 2155347997. Tried everything I could think of.

↧

System State Fails

January 7, 2016, 8:52 pm

≫ Next: Windows Server 2012 R2 Bare Metal Recovery failed with error 0x80070001

≪ Previous: Windows 2008R2 System State backup problem

I have arcserver backup software and it is failing on the system state so I ran a windows backup just for system state and it failed also with only 2 informational events as follows:

=============================event 1=====================================

Event ID 1001 / Source Windows Error Reporting / Log Name: Application

Fault bucket , type 0
Event Name: Windows Server Backup Error
Response: Not available
Cab Id: 0

Problem signature:
P1: 2
P2: 1
P3: 0x80780102
P4: 0x8078001d
P5: 0x00000000
P6: 0x8078001d
P7: 0x80780064
P8: 0x00000000
P9:
P10:

Attached files:

These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\NonCritical_2_eb4095c0d039d80764d38dbbea8fdad2a78b745_00000000_2e4eb9ec <SEE FILE CONTENTS BELOW>

Analysis symbol:
Rechecking for solution: 0
Report Id: ade020c0-b5be-11e5-813a-fc15b421aaed
Report Status: 4100
Hashed bucket:

=================================event 2===============================

Event ID: 517 / Source: Backup / Log Name: Application

The backup operation that started at '‎2016‎-‎01‎-‎08T04:16:22.016281500Z' has failed with following error code '0x80780102' (The system writer is not found in the backup.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.

XML DATA

-<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

-<System>

<ProviderName="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />

<ExecutionProcessID="10204" ThreadID="30388" />

<Channel>Application</Channel>

<Computer>mmvsvr01.smarttlaw.net</Computer>

<SecurityUserID="S-1-5-18" />

</System>

-<EventData>

</EventData>

</Event>

============================= FILE CONTENTS=========================

Version=1
EventType=Windows Server Backup Error
EventTime=130967002280258673
Consent=1
ReportIdentifier=ade020c0-b5be-11e5-813a-fc15b421aaed
Response.type=4
Sig[0].Name=Backup Target Type
Sig[0].Value=2
Sig[1].Name=Operation Type
Sig[1].Value=1
Sig[2].Name=Overall hr
Sig[2].Value=0x80780102
Sig[3].Name=Overall Detailed hr
Sig[3].Value=0x8078001d
Sig[4].Name=BMR hr
Sig[4].Value=0x00000000
Sig[5].Name=SSB hr
Sig[5].Value=0x8078001d
Sig[6].Name=Volume Backup hr
Sig[6].Value=0x80780064
Sig[7].Name=Application Backup hr
Sig[7].Value=0x00000000
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.3.9600.2.0.0.272.7
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
FriendlyEventName=Windows Server Backup Error
ConsentKey=Windows Server Backup Error
AppName=Microsoft® Block Level Backup Engine Service EXE
AppPath=C:\Windows\System32\wbengine.exe
ReportDescription=Windows Server Backup Error Report
ApplicationIdentity=00000000000000000000000000000000

↧

Windows Server 2012 R2 Bare Metal Recovery failed with error 0x80070001

May 19, 2016, 8:24 am

≫ Next: Window server Clustering

≪ Previous: System State Fails

Hello

I created a Full Server (and after tried only Bare Metal) backup in an SMB share using Windows Server Backup. When I tried to restote, I got this error 0x80070001. I read KB973455 and now I know that the fact is that WSBackup does not work with Reparse Points (aka Junctions or links). The C:\Users is a reparse point to C:\Documents and Settings (or vice-versa). But the problem is when you select Bare Metal Recovery, the WSBackup software does not allow you to exclude anything from the C: drive. So, how can I use Bare Metal Recovery for Windows Server 2012 R2? Fortunately this was only a test. What could be done if my server had really crashed?

Thanks in advance.

Luis

↧

Window server Clustering

May 18, 2016, 9:46 am

≫ Next: windows server backup problem

≪ Previous: Windows Server 2012 R2 Bare Metal Recovery failed with error 0x80070001

Hi I have two servers both are running with windows server 2012 r2 standard. In that, Primary Server hosted web server and now second as stand by server.

Now, I would like to do server Clustering From 1 server to 2 server..... and it should provide total replica. If one server goes down automatically another goes up without down time.... so that everyone can reach to webserver.

pls suggest me

Thanks

Rajesh

↧

windows server backup problem

May 15, 2016, 11:33 pm

≫ Next: Windows 2008R2 x64 System Recovery on NEC Express 5800 R120e-2M

≪ Previous: Window server Clustering

each time i start a full backup to the server (windows 2012 R2 standard), i get the following error "the backup threw an exception".

the backup was working a while ago. is there any windows update that may have damaged the backup procedure ?

↧

Windows 2008R2 x64 System Recovery on NEC Express 5800 R120e-2M

May 12, 2016, 7:07 pm

≫ Next: Backup operation has completed with errors

≪ Previous: windows server backup problem

Hello,

I need to perform a complete system recovery test on our UAT servers.

Current Configurations : NEC EXpress 5800 R120e-2M

Disk Drives : 3 disks ( C:, D: and Y drive )

I tried yesterday but did not succeed.

Steps.

I made a full system backup image on drive Y: It was successful.

Boot the system using Windows 2008R2 bootable CD and select Recover System option.

Problems:

1. Windows could not recognize the disks firstly then I checked the NEC Express 5800 manual and found that I need to load the RAID drivers when Windows asks for the Load Drivers. Drivers were load successfully. It is hardware RAID implemented in the server.

Luckily, Windows detects the current installed operating system but the problem was that,

Windows detects the C: as H: when it displayed the list of installed operating.I tried next but Windows could not detect the backup image and finally gave up.

I saw that all the disks volumes changed as follows

C : drive became H:

D : drive became N:

Y : drive became L:

I am not able to understand this behavior. Appreciate if someone can please provide some insight/information for above problem.

I am stuck at this point and can not test the Windows Full System Recovery on UAT before attempting it on our Production and DR environment.

Finally I booted the server as normal and I can see C,D and Y: drives.

Thanks,

Praveen

↧

Backup operation has completed with errors

May 23, 2016, 7:57 am

≫ Next: Windows Server Backup - Reporting Failed, But creates a backup file

≪ Previous: Windows 2008R2 x64 System Recovery on NEC Express 5800 R120e-2M

I am backing up a server 2008 R2 to a server 2012 r2. that backup was running successfully for a year, and in the last month it has stopped backing up the larger (1.1 TB) volume. Backup manager says "Completed with warnings" and event ID lists backup, 7 with the following details:

-	System

-	Provider

[ Name]

Microsoft-Windows-Backup

[ Guid]

{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}

EventID

Version

Level

Task

Opcode

Keywords

0x4000000000000000

-	TimeCreated

[ SystemTime]

2016-05-22T03:26:34.239515700Z

EventRecordID

1605

Correlation

-	Execution

[ ProcessID]

1009388

[ ThreadID]

1010012

Channel

Microsoft-Windows-Backup

Computer

xxxxxxxxxxxxxxxx

-	Security

[ UserID]

S-1-5-18

-	EventData

BackupTemplateID

{1DF9CEF6-AF9A-4F2A-98B0-2AA4627041B5}

HRESULT

BackupState

BackupTarget

\\xxx.xxx.x.xx\XXXXXXXXXXp

NumOfVolumes

BackupTime

2016-05-22T02:30:50.344648000Z

HRESULT2

VolumesInfo

DetailedHRESULT

SourceSnapStartTime

2016-05-22T02:30:50.017037500Z

SourceSnapEndTime

2016-05-22T02:31:09.970077000Z

PrepareBackupStartTime

PrepareBackupEndTime

BackupWriteStartTime

BackupWriteEndTime

TargetSnapStartTime

1601-01-01T00:00:00.000000000Z

TargetSnapEndTime

1601-01-01T00:00:00.000000000Z

DVDFormatStartTime

DVDFormatEndTime

MediaVerifyStartTime

MediaVerifyEndTime

BackupPreviousState

ComponentStatus

SSBEnumerateStartTime

1601-01-01T00:00:00.000000000Z

SSBEnumerateEndTime

1601-01-01T00:00:00.000000000Z

SSBVhdCreationStartTime

1601-01-01T00:00:00.000000000Z

SSBVhdCreationEndTime

1601-01-01T00:00:00.000000000Z

SSBBackupStartTime

1601-01-01T00:00:00.000000000Z

SSBBackupEndTime

1601-01-01T00:00:00.000000000Z

SystemStateBackup

BMR

false

VssFullBackup

false

UserInputBMR

false

UserInputSSB

false

BackupSuccessLogPath

BackupFailureLogPath

EnumerateBackupStartTime

EnumerateBackupEndTime

PruneBackupStartTime

PruneBackupEndTime

↧

Windows Server Backup - Reporting Failed, But creates a backup file

May 26, 2016, 1:23 pm

≫ Next: Concurrent or backup server - advice needed

≪ Previous: Backup operation has completed with errors

Currently have a Server running 2008 R2. Also runs Hyper-V with 3 VMs. VM's are located on the D drive, so I gave up trying to back these up at the same time as the C, since it was timing out.

I have a daily backup setup - just VSS Full Backup the Local Disk (C:), no bare metal recovery or system state. This is backing up to a shared network drive on a different server.

Every day the backup status comes back as failed. However when I go to the destination that the backup should be going to, I'm seeing a VHD file that is 280GB, which is the expected size to see.

The error reported in Windows Server Backup is "One of the backup files could not be created. Detailed error: the parameter is incorrect"

WSB is horrible at providing any helpful error reports on what the real problem is.

Anyone have an idea why it's creating a large backup file, but reporting as failed with this error?

↧

Concurrent or backup server - advice needed

May 27, 2016, 7:36 am

≫ Next: Disk Duplicator question

≪ Previous: Windows Server Backup - Reporting Failed, But creates a backup file

Hello,

We have a small business and want to implement a backup server. We have identical hardware on the secondary

server. So there is the primary server. There is a second machine which is to become the main server should something

happen to it.

First of all, I would like to make an identical copy of the OS or at least the settings from the first server. I realize that both cannot be the same and connected online at the same time. There would be IP and machine name conflicts.

Second, I want to implement a system where this secondary backup server is kept up to date ideally in real time, or at worse case, updating it at a particular time each day, say 8:00pm. These servers are in 2 separate physical locations in a building.

Please give me some options on how I would do accomplish these tasks.

Thanks so much.

Mike

↧

Disk Duplicator question

May 27, 2016, 8:33 am

≫ Next: games for windows live

≪ Previous: Concurrent or backup server - advice needed

Hello,

I have 2 windows servers 2008 Std R2 and they are domain controllers. These were put together long time ago and obviously the HD configuration was thought about carefully. I have inherited this configuration. In each server (server1 and server2) there is only one HD.

To mitigate the eventuality of a disk crash, I am thinking of duplicating the HD in both of these servers. I bought Star Tech product: eSATA/USB 3.0 Hard Drive Duplicator Dock- Standalone HDD Cloner with SATA 6 Gbps for fast-speed duplication. Model number:Product ID: SDOCK2U33RE.

So the idea is if the HD in server1 crashes, I should be able to put in the duplicated copy and carry on. I understand that this is not a recommended configuration and I should really be having mirrored HD (RAID-1), but let us for the time being assume that is not possible at this time and just analyze the HD duplication method as the current possibility.

Could someone comment please?

Regards

Ravi Shankar

↧

games for windows live

May 29, 2016, 12:53 pm

≫ Next: How to delete old backups on Windows 2012 Server Backup

≪ Previous: Disk Duplicator question

puede alguien ayudarme con esto...

Game for Windows - LIVE no se puede conectar al servicio LIVE. Asegurese de que su equipo esta conectado a internet.

Sí tengo internet!!!

↧

How to delete old backups on Windows 2012 Server Backup

May 30, 2016, 6:43 pm

≪ Previous: games for windows live

Hi there

We have 2 Windows Server 2012 physical machine and these machine has cross synchronization in Hyper-V and also each machine has USB dedicated backup device attached to this machine. On the USB dedicated backup device, we ran a Windows Server Backup (Local backup) run once a day and we only select the VMs and Host Component for backing up and use an option for "Backup to harddisk that is dedicated for backups (recommended).

Now we have a warning saying that the space for USB backup device is only 5% left and in this device we have 273 copies of backups (capacity 1863 GB and used space 1767 GB), so my question are:

1. Does this Windows backup will overwrite the old one by any chance automatically? Or it will throw an error if it's full?

2. If it's throwing an error, how do we deleted the old backups?

We prefer to have first option recycling/deleting the old one automatically. Option (2), we can't really see the contain of the disk .. not sure how we are going to delete old backups. Alternative, we are thinking to supply another brand new USB disk ... is that the best option?

Waiting for your feedback.

Thanks

Isadewa

↧

안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트

April 19, 2016, 10:17 am

≫ Next: Restoration of backup

≪ Previous: How to delete old backups on Windows 2012 Server Backup

안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트
안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트

↧

Restoration of backup

May 31, 2016, 9:56 pm

≫ Next: Windows Server 2008 R2 Backup - Slow backup to iSCSI Target on a NAS

≪ Previous: 안전토토사이트추천→→→BOXX88 ．COM (code:Bbc88)→→→사다리사이트 네임드사다리사이트

I've a backup of file server running windows 2012 server on external hard disk. Is it possible to restore the backup on another server running windows 2012 server ? When trying to restore the backup, the process couldn't be completed. Please help.

↧

Latest Images