Event ID 4097 Hyper-V-Integration-VSS

July 11, 2014, 9:08 am

≫ Next: WSB on Server 2012 - ID 517 error 0x80070001 on system state

≪ Previous: Restore Server 2008 R2 to Hyper V or Different hardware resulting in BSOD 0x0000007B

$

0

0

Hello,

Trying to figure out why I'm getting Event ID 4097 Hyper-V-Integration-VSS after the backup runs. The event says:

"The Virtual machine A9BCE8FC-FB7A-463A-B4F3-3A6AE83446B7 cannot be backed up since it has dynamic disks in it"

These starting to appear after I had to add another virtual hard disk to my Exchange 2010 VM. Everything is working fine and the backups complete successfully. The backup is being done by CA ArcServ. I also get the same errors if I use Windows Server Backup as well. The second additional virtual hard drive is a fixed disk, not dynamic.

Dose anybody know why I"m getting these and how to fix it so they go away?

---

WSB on Server 2012 - ID 517 error 0x80070001 on system state

June 18, 2014, 12:01 pm

≫ Next: Backup - Advice (multiple locations)

≪ Previous: Event ID 4097 Hyper-V-Integration-VSS

$

0

0

Hi,

i've setup Windows server Backup on a Windows server 2012 standard (which is a Domain Controler) to do a complete backup on a external hard drive.

During the backup, all go well until system state backup. It fail with the following error in the event log (event id 517) : 0x80070001 (invalid function)

after some research, i found that log :

Version=1
EventType=Windows Server Backup Error
EventTime=130475424208827903
Consent=1
ReportIdentifier=3d8a7e6a-f6a8-11e3-941f-d6db6bcd8e80
Response.type=4
Sig[0].Name=Backup Target Type
Sig[0].Value=3
Sig[1].Name=Operation Type
Sig[1].Value=1
Sig[2].Name=Overall hr
Sig[2].Value=0x80070001
Sig[3].Name=Overall Detailed hr
Sig[3].Value=0x00000000
Sig[4].Name=BMR hr
Sig[4].Value=0x00000000
Sig[5].Name=SSB hr
Sig[5].Value=0x8078001d
Sig[6].Name=Volume Backup hr
Sig[6].Value=0x00000000
Sig[7].Name=Application Backup hr
Sig[7].Value=0x00000000
DynamicSig[1].Name=Version du système
DynamicSig[1].Value=6.2.9200.2.0.0.272.7
DynamicSig[2].Name=Identificateur de paramètres régionaux
DynamicSig[2].Value=3084
FriendlyEventName=Windows Server Backup Error
ConsentKey=Windows Server Backup Error
AppName=Exécutable du service de moteur de sauvegarde en mode bloc Microsoft®
AppPath=C:\Windows\System32\wbengine.exe
ReportDescription=Windows Server Backup Error Report

System State Backup return error 0x8078001d. 

I've google a lot about these errors but nothing concerning Windows Server 2012.

VSS Writers does not show any errors (using vssadmi nlist writers)

No disk error anywhere in the event viewer.

I've also check the "JUNCTION" issue (mostly known in Win 7 and Win server 2008 r2) but none of them are "mounted drive" so ...

I'm really runing out of idea ...

EDIT : 

No updates are applyed to the machine.

will try with updates ...

EDIT :

even with the last Windows updates, i keep get the same error

Backup - Advice (multiple locations)

July 12, 2014, 5:18 am

≫ Next: cant send emails

≪ Previous: WSB on Server 2012 - ID 517 error 0x80070001 on system state

$

0

0

Hello,

I currently have my Server 2012 Essentials running raid 1.

It also has a third internal disk which I have configured an incremental backup, all data plus bare metal.

Ideally I had hoped to use robocopy to copy all the data on this 3rd disk to a hidden disk on one of the client pc's except windows has hidden this drive on the server and the folders seem to be locked down with permissions. Is it possible / sensible to be copy this incremental off to another pc.

The next stage would be to robocopy from the client pc's hidden drive to two removable external drives swapped and removed from the office.

Can someone please help, can I make this drive visible (by giving it a letter) and what permissions do I need to add to be able to copy the WindowsImageBackup folder? (since nothing I have tried works)

any advice would be very much appreciated.

---

Andy Walker

cant send emails

July 5, 2014, 3:25 pm

≫ Next: Server 2012 Backup and Restore problems

≪ Previous: Backup - Advice (multiple locations)

$

0

0

cant send email tp multiple people because the addresses are wrong....

Server 2012 Backup and Restore problems

July 7, 2014, 11:37 am

≫ Next: Backup fails

≪ Previous: cant send emails

$

0

0

I created a full system backup (Bare Metal Copy) to an external USB drive with Windows Server Backup and it made a complete backup as expected. I am running Server 2012 r2. What I did not expect is that when I went to use that backup from the server 2012 r2 boot disk, it could see the USB drive, but not the image that I wanted to restore to. Am I doing something wrong? There are tons of articles on how to do the restore, but those are useless if the backup image can't be read by windows setup.

Backup fails

July 14, 2014, 3:41 am

≫ Next: VSS Set to run every hour only run for the first 3

≪ Previous: Server 2012 Backup and Restore problems

$

0

0

Windows server backup on windows 2008 R2 fails on Seagate 2 TB hard disk. Is there a workraound to make it work on 2 TB disk.

VSS Set to run every hour only run for the first 3

July 14, 2014, 1:47 pm

≫ Next: hotfix issue

≪ Previous: Backup fails

$

0

0

Hello we have server 2008 with volume shadow copies to run "Every 1 hour for 2 hours every day...". It will start at 6 am and run every hour until 8 am then stops, then starts all over again the next morning at 6 am. I looked in the event view to see if VSS was throwing any errors, and I did not see anything. Where should I start to diagnose my problem? Has anyone else had this issue before?

hotfix issue

July 15, 2014, 9:29 pm

≫ Next: Backup error due to System Writer missing (enumeration of system32 printer dlls takes too long)

≪ Previous: VSS Set to run every hour only run for the first 3

$

0

0

support.microsoft.com/kb/2807849/en-us …… ... hotfix available to download is for windows 7 and 2008 R2, but it Applies to server 2012 , help

---

Backup error due to System Writer missing (enumeration of system32 printer dlls takes too long)

July 16, 2014, 1:06 am

≫ Next: Windows server 2012 R2-The process cannot access the file because it is being used by another process.

≪ Previous: hotfix issue

$

0

0

Hi,

On a Windows 2008 R2 we get a Windows Backup error while backupping System State (event id: 5, error code: '2155347997').

We tried *ALL* solutions found on Internet regarding the same issue (and we also applied the suggested hotfix KB2807849) but without success. So we DIGGED INTO VSS to see what is happening.

***1) First we saw that an USB printer had a problem and this resulted inhundreds of entries in the following registry keys:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100010]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100011]
...
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}\79590]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}\79591]
...

***2) We completely removed ALL drivers/devices related to that printer (now the DeviceNameStore is empty and
pnputil -e returns no driver related to the printer)

***3) Using process monitor we saw that during vssadmin list writers the system is searching for the DLLs related to that printer AND SEEMS CAUGHT IN AN ENDLESS LOOP: this is an excerpt of the scan:

09:56:34,5205954    svchost.exe    324    RegSetValue    HKLM\System\CurrentControlSet\services\VSS\Diag\System Writer\IDENTIFY (Enter)    SUCCESS
...
...
09:57:18,2310377 svchost.exe 324 QueryDirectory C:\Windows\System32\spool\drivers\color\cnz005.icc NO SUCH FILE Filter: cnz005.icc
09:57:18,2312877 svchost.exe 324 QueryDirectory C:\Windows\System32\spool\drivers\color\cnf6500m.icc NO SUCH FILE Filter: cnf6500m.icc
09:57:18,2314854 svchost.exe 324 QueryDirectory C:\Windows\System32\cncmfp20.ini NO SUCH FILE Filter: cncmfp20.ini
09:57:18,2316416 svchost.exe 324 QueryDirectory C:\Windows\System32\cnclsi20.dll NO SUCH FILE Filter: cnclsi20.dll
09:57:18,2318288 svchost.exe 324 QueryDirectory C:\Windows\System32\cnclsd20.dll NO SUCH FILE Filter: cnclsd20.dll
09:57:18,2319893 svchost.exe 324 QueryDirectory C:\Windows\System32\cnclsc20.dll NO SUCH FILE Filter: cnclsc20.dll
09:57:18,2321452 svchost.exe 324 QueryDirectory C:\Windows\System32\cnclst20.dll NO SUCH FILE Filter: cnclst20.dll
09:57:18,2323013 svchost.exe 324 QueryDirectory C:\Windows\System32\cnclsu20.dll NO SUCH FILE Filter: cnclsu20.dll
09:57:18,2326240 svchost.exe 324 QueryDirectory C:\Windows\System32\cncilsc.dll NO SUCH FILE Filter: cncilsc.dll
09:57:18,2332784 svchost.exe 324 CreateFile C:\Windows\twain_32\mf6500 NAME NOT FOUND
09:57:18,2333842 svchost.exe 324 CreateFile C:\Windows\twain_32\mf6500 NAME NOT FOUND
09:57:18,2353696 svchost.exe 324 QueryDirectory C:\Windows\System32\spool\drivers\color\cnz005.icc NO SUCH FILE Filter: cnz005.icc
09:57:18,2356209 svchost.exe 324 QueryDirectory C:\Windows\System32\spool\drivers\color\cnf6500m.icc NO SUCH FILE Filter: cnf6500m.icc
09:57:18,2358377 svchost.exe 324 QueryDirectory C:\Windows\System32\cncmfp20.ini NO SUCH FILE Filter: cncmfp20.ini
09:57:18,2359974 svchost.exe 324 QueryDirectory C:\Windows\System32\cnclsi20.dll NO SUCH FILE Filter: cnclsi20.dll
09:57:18,2361536 svchost.exe 324 QueryDirectory C:\Windows\System32\cnclsd20.dll NO SUCH FILE Filter: cnclsd20.dll
09:57:18,2363098 svchost.exe 324 QueryDirectory C:\Windows\System32\cnclsc20.dll NO SUCH FILE Filter: cnclsc20.dll
09:57:18,2364758 svchost.exe 324 QueryDirectory C:\Windows\System32\cnclst20.dll NO SUCH FILE Filter: cnclst20.dll
09:57:18,2366307 svchost.exe 324 QueryDirectory C:\Windows\System32\cnclsu20.dll NO SUCH FILE Filter: cnclsu20.dll
09:57:18,2369765 svchost.exe 324 QueryDirectory C:\Windows\System32\cncilsc.dll NO SUCH FILE Filter: cncilsc.dll
09:57:18,2376014 svchost.exe 324 CreateFile C:\Windows\twain_32\mf6500 NAME NOT FOUND
09:57:18,2377065 svchost.exe 324 CreateFile C:\Windows\twain_32\mf6500 NAME NOT FOUND
09:57:18,2397129 svchost.exe 324 QueryDirectory C:\Windows\System32\spool\drivers\color\cnz005.icc NO SUCH FILE Filter: cnz005.icc
...
... and so on

.... THE SAME FILES REPEATED HUNDREDS OF TIMES!!!! ...

It seems that somewhere there is a catalog of system files which still contains the references to the (same) files used by the hundreds of devices that WERE present in the DeviceNameStore (see point ***1 above, but now it is empty),  and the System Writer continues to search/enumerate those files and fails.

How can I fix it ? Is there a way to "reset" the System Writer and "rebuild" (???) the correct files that it should backup? (in order to complete a successfull system state backup)

Can you help me?

Thank you in advance.

Windows server 2012 R2-The process cannot access the file because it is being used by another process.

July 16, 2014, 12:57 pm

≫ Next: Problem with partion resulting in "One of the source volumes specified has an invalid format and cannot be protected using Windows Backup. Only volumes formatted with NTFS/ReFS can be protected."

≪ Previous: Backup error due to System Writer missing (enumeration of system32 printer dlls takes too long)

$

0

0

Hello All

We  have a windows server 2012 R2 hyper v server.

The backup on the server fails randomly with the following error messages.

The backup operation that started at '‎2014‎-‎07‎-‎16T19:34:22.544580700Z' has failed with following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.

Following is listed on the Backup error log

Backup of volume \\?\Volume{e2d75b2d-aaec-11e3-80b1-806e6f6e6963}\ has failed. The process cannot access the file because it is being used by another process.

Application backup
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
   Component: Host Component
   Caption     : Host Component
   Logical Path:

Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
   Component: 2DB0212A-140F-4682-BD6D-C95CC69BADA5
   Caption     : Online\Win7 - Sam
   Logical Path:

Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
   Component: 512B11E4-935B-4FE9-90AC-ABEE7282E380
   Caption     : Offline\Support Win XP
   Logical Path:

*-----------------------------*

So far have tried the following.

1. Taken a backup by excluding the VM s.

2. Taken a backup by removing the Vm s.

3. Taken a backup after removing antivirus

4. Deleted all catalog files , formatting the drive , removing/adding the backup feature

But nothing worked.

Any suggestions will be greatly appreciated.

Dhanushka

Problem with partion resulting in "One of the source volumes specified has an invalid format and cannot be protected using Windows Backup. Only volumes formatted with NTFS/ReFS can be protected."

January 3, 2014, 8:00 am

≫ Next: Windows Server Backup - Failed - Due to VSS

≪ Previous: Windows server 2012 R2-The process cannot access the file because it is being used by another process.

$

0

0

We have two new Windows Servers 2012 R2 that I'm trying to set backups on using a script. When I used the -allCritical switch, I get the error specified in the subject. When I look at the partition information using diskpart, I see a 2048 MB partition with no drive letter labeled as System that is FAT32. I was never prompted to my recollection of what file system to format the partition with. Is it safe to assign this partition a letter, convert to NTFS, and then remove the drive letter?

Thanks

Windows Server Backup - Failed - Due to VSS

July 16, 2014, 8:18 pm

≫ Next: Idea Net Setter is not working in Windows server 2003

≪ Previous: Problem with partion resulting in "One of the source volumes specified has an invalid format and cannot be protected using Windows Backup. Only volumes formatted with NTFS/ReFS can be protected."

$

0

0

Backups had been working fine for till last month but all of a sudden they began to fail.

System: Windows Server 2008 Std
Updates: All updates are installed

Error message :
The backup operation that started at '‎2014‎-‎07‎-‎17T02:18:18.338000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348249'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.

Here is my Volume shadow copy service details (In my Server that i want to backup):

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

C:\Windows\system32>vssadmin list shadowstorage
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.

Shadow Copy Storage association
   For volume: (\\?\Volume{0f696d27-0889-11e3-add9-806e6f6e6963}\)\\?\Volume{0f6
96d27-0889-11e3-add9-806e6f6e6963}\
   Shadow Copy Storage volume: (\\?\Volume{0f696d27-0889-11e3-add9-806e6f6e6963}
\)\\?\Volume{0f696d27-0889-11e3-add9-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 32 MB (32%)

Shadow Copy Storage association
   For volume: (F:)\\?\Volume{fd0a7fae-2fc9-11e3-b5c0-ac162d7483fb}\
   Shadow Copy Storage volume: (F:)\\?\Volume{fd0a7fae-2fc9-11e3-b5c0-ac162d7483
fb}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 6 GB (10%)

Shadow Copy Storage association
   For volume: (C:)\\?\Volume{0f696d28-0889-11e3-add9-806e6f6e6963}\
   Shadow Copy Storage volume: (C:)\\?\Volume{0f696d28-0889-11e3-add9-806e6f6e69
63}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 24.404 GB (10%)

Shadow Copy Storage association
   For volume: (D:)\\?\Volume{0f696d29-0889-11e3-add9-806e6f6e6963}\
   Shadow Copy Storage volume: (D:)\\?\Volume{0f696d29-0889-11e3-add9-806e6f6e69
63}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 25.474 GB (10%)

What could be the reason ? how to fix it ?

Idea Net Setter is not working in Windows server 2003

July 16, 2014, 5:31 am

≫ Next: Backing up a server

≪ Previous: Windows Server Backup - Failed - Due to VSS

$

0

0

Idea Net Setter is not working in Windows server 2003 Why? I guess because it is the server and not for to use the net setter. can someone please explain me?

Backing up a server

July 17, 2014, 10:13 am

≫ Next: I want to find any backup and recovery solution for SharePoint server 2013 enterprise

≪ Previous: Idea Net Setter is not working in Windows server 2003

$

0

0

Hello,

I am new to servers and I do not have any experience at all.

I would like to know if I can just connect an external HD to my Server (currently running Windows Server 2003) an make a copy-paste action to copy the files and have a back-up? Is this process risky (I need to copy 1TB) ? or do I need any special sequence that I must follow to get the back up of these files? 

Thanks!

I want to find any backup and recovery solution for SharePoint server 2013 enterprise

July 18, 2014, 2:19 am

≫ Next: Information Store (2856) Shadow copy instance aborted

≪ Previous: Backing up a server

$

0

0

Dear Expertise,

Recent set up SharePoint server 2013 Enterprise, and looking for backup and recovery solution, does the built in Windows Backup can handle it, and how?

KF

---

Information Store (2856) Shadow copy instance aborted

July 18, 2014, 4:42 am

≫ Next: ahmed shoukry

≪ Previous: I want to find any backup and recovery solution for SharePoint server 2013 enterprise

$

0

0

Hello,

We have Windows Server Standard FE SP2 server 

We are receiving Event 2007 on the server. We have checked and found VSS writers are stable and backup (Shadow Protect Backup Configured) is also getting successfully 

Can you please provide me the solutions

Thanks
Aarti

ahmed shoukry

July 19, 2014, 11:26 am

≫ Next: WSB on Server 2012 - ID 517 error 0x80070001 on system state

≪ Previous: Information Store (2856) Shadow copy instance aborted

$

0

0

أننى من مستخدمى windows 7 وعند عملية windows updata يقوم التعرف على الملفات اللازمة للتحديث لتنزيلها على الجهاز ولكن لا يتم إنزال تلك الملفات للجهاز...فما هو الواجب اتخاذه لحل هذة المشكلة...

حيث تم محاولة تشغيل background intelligent transfer إلا إنه يظهر رسالة الخطأ 126

WSB on Server 2012 - ID 517 error 0x80070001 on system state

June 18, 2014, 12:01 pm

≫ Next: Consolidating Windows Server 2008 R2 backups?

≪ Previous: ahmed shoukry

$

0

0

Hi,

i've setup Windows server Backup on a Windows server 2012 standard (which is a Domain Controler) to do a complete backup on a external hard drive.

During the backup, all go well until system state backup. It fail with the following error in the event log (event id 517) : 0x80070001 (invalid function)

after some research, i found that log :

Version=1
EventType=Windows Server Backup Error
EventTime=130475424208827903
Consent=1
ReportIdentifier=3d8a7e6a-f6a8-11e3-941f-d6db6bcd8e80
Response.type=4
Sig[0].Name=Backup Target Type
Sig[0].Value=3
Sig[1].Name=Operation Type
Sig[1].Value=1
Sig[2].Name=Overall hr
Sig[2].Value=0x80070001
Sig[3].Name=Overall Detailed hr
Sig[3].Value=0x00000000
Sig[4].Name=BMR hr
Sig[4].Value=0x00000000
Sig[5].Name=SSB hr
Sig[5].Value=0x8078001d
Sig[6].Name=Volume Backup hr
Sig[6].Value=0x00000000
Sig[7].Name=Application Backup hr
Sig[7].Value=0x00000000
DynamicSig[1].Name=Version du système
DynamicSig[1].Value=6.2.9200.2.0.0.272.7
DynamicSig[2].Name=Identificateur de paramètres régionaux
DynamicSig[2].Value=3084
FriendlyEventName=Windows Server Backup Error
ConsentKey=Windows Server Backup Error
AppName=Exécutable du service de moteur de sauvegarde en mode bloc Microsoft®
AppPath=C:\Windows\System32\wbengine.exe
ReportDescription=Windows Server Backup Error Report

System State Backup return error 0x8078001d. 

I've google a lot about these errors but nothing concerning Windows Server 2012.

VSS Writers does not show any errors (using vssadmi nlist writers)

No disk error anywhere in the event viewer.

I've also check the "JUNCTION" issue (mostly known in Win 7 and Win server 2008 r2) but none of them are "mounted drive" so ...

I'm really runing out of idea ...

EDIT : 

No updates are applyed to the machine.

will try with updates ...

EDIT :

even with the last Windows updates, i keep get the same error

Consolidating Windows Server 2008 R2 backups?

July 20, 2014, 9:35 am

≫ Next: system state backup and restore activation

≪ Previous: WSB on Server 2012 - ID 517 error 0x80070001 on system state

$

0

0

I'm doing a favour for someone by doing their backup rotations (which they're doing in Windows Server Backup) and also periodic testing of server restores. To this end, I've taken possession of a huge number of hard disks to rotate for backups... and it's kind of a nightmare to deal with now that the backups are sprawled all over these disks, especially since the size of the backups dwarfs the capacity of each disk.

what I'd like to do is

1. Consolidate all the backup disks into a single location, which I can then archive properly.

2. Recycle a couple of those disks into a new rotation of just two disks per server for backups going forwards.

3. Recycle / keep the rest as spares.

What I REALLY want to avoid is the situation where I get asked to restore a backup, and I end up hunting in ten disks for when the required restore date might be.

Could someone tell me the best way (or if there is a way) to consolidate multiple backup disks into one location? Thanks

system state backup and restore activation

July 21, 2014, 4:34 am

≫ Next: Windows 2012 and VSS problem

≪ Previous: Consolidating Windows Server 2008 R2 backups?

$

0

0

i installed active directory on my windows server 2012 r2 before getting the activation keys and now i cannot activate it since it is already promoted to a DC, if i take a systemstate backup and then format and reinstall the server, and then activate the windows and then perform system state restore will it solve my problem? or will it roll back to an evaluation version???